rtorrent
: 18 sty 2018, 12:35
2. Instalacja programów i paczek.
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install subversion build-essential automake libtool libcppunit-dev libcurl3-dev
sudo apt-get install libsigc++-2.0-dev libcppunit-dev unzip unrar-free curl libncurses-dev
sudo apt-get install apache2 apache2-utils php5 php5-cli php5-curl php-xml-rss php5-xmlrpc
sudo apt-get install php5-sqlite sqlite libapache2-mod-php5 libapache2-mod-xsendfile
3. Instalacja i włączanie modułu scgi.
sudo apt-get install libapache2-mod-scgi
ln -s /etc/apache2/mods-available/scgi.load /etc/apache2/mods-enabled/scgi.load
sudo /etc/init.d/apache2 restart
4. Instalacja XMLRPC.
cd $HOME
sudo mkdir install
cd install
sudo svn checkout http://svn.code.sf.net/p/xmlrpc-c/code/stable xmlrpc-c
cd xmlrpc-c
sudo ./configure --disable-cplusplus
sudo make
sudo make install
5. Instalacja rTorrent.
5.1. Instalacja bibliotek Libtorrent.
cd ..
sudo wget https://github.com/rakshasa/libtorrent/ ... 3.4.tar.gz -O libtorrent-0.13.4.tar.gz
sudo tar xvf libtorrent-0.13.4.tar.gz
cd libtorrent-0.13.4
sudo ./autogen.sh
sudo ./configure
sudo make
sudo make install
5.2. Instalacja rTorrent.
cd ..
sudo wget https://github.com/rakshasa/rtorrent/ar ... 9.4.tar.gz -O rtorrent-0.9.4.tar.gz
sudo tar xvf rtorrent-0.9.4.tar.gz
cd rtorrent-0.9.4
sudo ./autogen.sh
sudo ./configure --with-xmlrpc-c
sudo make
sudo make install
sudo ldconfig
6. Tworzenie folderów potrzebnych do poprawnego funkcjonowania rTorrenta.
sudo mkdir -p /opt/rtorrent/{session,watch,download}
sudo chmod 777 -R /opt/rtorrent/{session,watch,download}
sudo chown rtorrent:rtorrent -R /opt/rtorrent/{session,watch,download}
7. Tworzenie i edycja pliku z konfiguracją użytkownika .rtorrent.rc.
sudo wget https://raw.githubusercontent.com/raksh ... torrent.rc -O /opt/rtorrent/.rtorrent.rc
sudo nano /opt/rtorrent/.rtorrent.rc
--->
# Maksymalna i minimalna ilość perów
min_peers = 40
max_peers = 100
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50
# Maximum number of simultanious uploads per torrent.
#max_uploads =15
# Tu ustawiamy prędkość wysyłania (upload) i pobierania (download) 0=bez ograniczeń
# Zalecana prędkość uploadu to 75% maksymalnej prędkości łącza
download_rate = 0
upload_rate = 8
# DomyÅ›lny katalog do zapisu pobranych plików:
directory = ~/rtorrent/pobrane
#Katalog gdzie zapisywana będzie sesja
session = ~/.session
# Przeszukiwanie danego katalogu na obecność torrentów do pobrania
# Zatrzymywanie gdy torrent (plik torrent) zostanie usuniety
schedule = watch_directory,5,5,load_start=~/rtorrent/pliki-torrent/*.torrent
# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 8200-8300
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 128
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"# Maksymalna i minimalna ilość perów
min_peers = 40
max_peers = 100
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50
# Maximum number of simultanious uploads per torrent.
#max_uploads =15
# Tu ustawiamy prędkość wysyłania (upload) i pobierania (download) 0=bez ograniczeń
# Zalecana prędkość uploadu to 75% maksymalnej prędkości łącza
download_rate = 0
upload_rate = 8
# Domyślny katalog do zapisu pobranych plików:
directory = ~/rtorrent/pobrane
#Katalog gdzie zapisywana będzie sesja
session = ~/.session
# Przeszukiwanie danego katalogu na obecność torrentów do pobrania
# Zatrzymywanie gdy torrent (plik torrent) zostanie usuniety
schedule = watch_directory,5,5,load_start=~/rtorrent/pliki-torrent/*.torrent
# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 6890-6999
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 128
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
dht = auto
dht_port = 6881
peer_exchange = yes
# SCGI
scgi_port = localhost:5000
#umask
system.umask.set = 0022
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install subversion build-essential automake libtool libcppunit-dev libcurl3-dev
sudo apt-get install libsigc++-2.0-dev libcppunit-dev unzip unrar-free curl libncurses-dev
sudo apt-get install apache2 apache2-utils php5 php5-cli php5-curl php-xml-rss php5-xmlrpc
sudo apt-get install php5-sqlite sqlite libapache2-mod-php5 libapache2-mod-xsendfile
3. Instalacja i włączanie modułu scgi.
sudo apt-get install libapache2-mod-scgi
ln -s /etc/apache2/mods-available/scgi.load /etc/apache2/mods-enabled/scgi.load
sudo /etc/init.d/apache2 restart
4. Instalacja XMLRPC.
cd $HOME
sudo mkdir install
cd install
sudo svn checkout http://svn.code.sf.net/p/xmlrpc-c/code/stable xmlrpc-c
cd xmlrpc-c
sudo ./configure --disable-cplusplus
sudo make
sudo make install
5. Instalacja rTorrent.
5.1. Instalacja bibliotek Libtorrent.
cd ..
sudo wget https://github.com/rakshasa/libtorrent/ ... 3.4.tar.gz -O libtorrent-0.13.4.tar.gz
sudo tar xvf libtorrent-0.13.4.tar.gz
cd libtorrent-0.13.4
sudo ./autogen.sh
sudo ./configure
sudo make
sudo make install
5.2. Instalacja rTorrent.
cd ..
sudo wget https://github.com/rakshasa/rtorrent/ar ... 9.4.tar.gz -O rtorrent-0.9.4.tar.gz
sudo tar xvf rtorrent-0.9.4.tar.gz
cd rtorrent-0.9.4
sudo ./autogen.sh
sudo ./configure --with-xmlrpc-c
sudo make
sudo make install
sudo ldconfig
6. Tworzenie folderów potrzebnych do poprawnego funkcjonowania rTorrenta.
sudo mkdir -p /opt/rtorrent/{session,watch,download}
sudo chmod 777 -R /opt/rtorrent/{session,watch,download}
sudo chown rtorrent:rtorrent -R /opt/rtorrent/{session,watch,download}
7. Tworzenie i edycja pliku z konfiguracją użytkownika .rtorrent.rc.
sudo wget https://raw.githubusercontent.com/raksh ... torrent.rc -O /opt/rtorrent/.rtorrent.rc
sudo nano /opt/rtorrent/.rtorrent.rc
--->
# Maksymalna i minimalna ilość perów
min_peers = 40
max_peers = 100
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50
# Maximum number of simultanious uploads per torrent.
#max_uploads =15
# Tu ustawiamy prędkość wysyłania (upload) i pobierania (download) 0=bez ograniczeń
# Zalecana prędkość uploadu to 75% maksymalnej prędkości łącza
download_rate = 0
upload_rate = 8
# DomyÅ›lny katalog do zapisu pobranych plików:
directory = ~/rtorrent/pobrane
#Katalog gdzie zapisywana będzie sesja
session = ~/.session
# Przeszukiwanie danego katalogu na obecność torrentów do pobrania
# Zatrzymywanie gdy torrent (plik torrent) zostanie usuniety
schedule = watch_directory,5,5,load_start=~/rtorrent/pliki-torrent/*.torrent
# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 8200-8300
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 128
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"# Maksymalna i minimalna ilość perów
min_peers = 40
max_peers = 100
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50
# Maximum number of simultanious uploads per torrent.
#max_uploads =15
# Tu ustawiamy prędkość wysyłania (upload) i pobierania (download) 0=bez ograniczeń
# Zalecana prędkość uploadu to 75% maksymalnej prędkości łącza
download_rate = 0
upload_rate = 8
# Domyślny katalog do zapisu pobranych plików:
directory = ~/rtorrent/pobrane
#Katalog gdzie zapisywana będzie sesja
session = ~/.session
# Przeszukiwanie danego katalogu na obecność torrentów do pobrania
# Zatrzymywanie gdy torrent (plik torrent) zostanie usuniety
schedule = watch_directory,5,5,load_start=~/rtorrent/pliki-torrent/*.torrent
# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 6890-6999
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 128
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
dht = auto
dht_port = 6881
peer_exchange = yes
# SCGI
scgi_port = localhost:5000
#umask
system.umask.set = 0022
Login info provided by you in the step 12.